Waldbeck AirBuddy, Руководство пользователя

Страница: 14 / 40

14
EN
8. Being sure trigger lock is in unlock position, press the trigger.
9. The unit will begin to infl ate the tire to the set pressure level, and shut off
automatically when reached.
10. When done, press the trigger once to tum off, and slide trigger lock to lock
position.
11. Remove the thread connector from the tire quickly, and replace valve stem
cap on tire, if required.
CAUTION
Risk of injury! Connector may be hot. Use caution and allow to
cool before removing.
12. Emeruency lamp: Turn on the bottom. LED shows red recording light.
When a fault occurs, you can press the second time. LED shows red quick
fl ashing light. Press the third time, it shows white light being used for
illumination.
Important Notes
• To avoid over-infl ation of tires, please check the recommended tire
pressure in the vehicle‘s owners manual. For bicycle tires, check markings
on tire.
• The LCD display must tum on before operating air infl ator. Please read and
understand the instructions provided in the manual prior to operation.
• Use a separate pressure gauge for more accurate reading.
How to Remove the Battery Pack