11
DECANTING PROCEDURE
1.
Pour wine or spirits into the glass decanter.
Do not exceed the MAX level,
which is below the WAKE UP WINE™ logo printed on the glass decanter
(Figure 4). If necessary, place the sediment strainer on top of the glass
decanter to filter sediments typically found in older wines.
2.
Place the glass decanter on the round recess of the decanting base unit.
Make sure it is
centered in the middle of the round recess.
3.
Turn on the power switch.
After one (1) second, “HELLO” will be displayed on the LCD. After 3
seconds, “WAKE UP WINE” will be shown on the display.
4.
Set decanting time.
Refer to the Recommended Decanting Times Guide. For example, press the
button for a 5-minute run time. Press to increase or
to decrease decanting time.
For a 5-minute decanting time, “05 Mins” will be shown on the display. The “STOP” on the display
will change to “05:00” then the countdown timer will automatically begin. After one (1) second, the
LED lights under the round recess of the decanting base unit will turn on and the decanting cycle
will begin.
WAKE UP WINE
00 Mins
STOP
HELLO
Lifting the glass decanter from the decanting base unit will pause the decanting cycle and turn
off the LED lights. Place the glass decanter back on the base unit to resume the decanting cycle.