Waio Inc : www.waio.com
888.950.9246, Email: [email protected]
Page
1
FCC Compliance Statement
This equipment complies with Part 15 of the FCC Rules.
Operation of this device is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult our techs support department or an experienced radio/TV technician for help
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to the FCC Rules.
Operation with non-approved equipment is likely to result in interference to radio and TV reception. The user is
cautioned that changed and modifications made to the equipment without the approval of the manufacturer could void
the user’s authority to operate this equipment.
Canada Compliance Statement
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
FM Transmitter
Models: AXS-FMTD
AXS-FMTXD
CT-FMTD