Wahuda 60200PC-WHD, Руководство пользователя

Страница: 7 / 39

GENERAL SAFETY
（
cont.
）
CAUTION! MAINTAIN your balance. DO NOT extend yourself over the tool. Wear oil resistant rubber
soled shoes. Keep floor clear of debris, grease, and wax.
MAINTAIN all machines with care. ALWAYS KEEP machine clean and in good working order. KEEP all
blades and tool bits sharp.
NEVER leave a machine running, unattended. Turn the power switch to the OFF position. DO NOT
leave the machine until it has come to a complete stop.
REMOVE ALL MAINTENANCE TOOLS from the immediate area prior to turning the machine ON.
WARNING! STAY ALERT, watch what you are doing, and use common sense when operating any
machine. DO NOT operate any machine tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power tools may result in serious personal injury.
WARNING! USE ONLY recommended accessories. Use of incorrect or improper accessories could
cause serious injury to the operator and cause damage to the machine. If in doubt, DO NOT use it.
THE USE of extension cords is not recommended for 230V equipment. It is better to arrange the
placement of your equipment and the installed wiring to eliminate the need for an extension cord. If an
extension cord is necessary, refer to the chart in the Grounding Instructions section to determine the
minimum gauge for the extension cord. The extension cord must also contain a ground wire and plug
pin.
CAUTION! Wear proper clothing, DO NOT wear loose clothing, gloves, neckties, or jewelry. These
items can get caught in the machine during operations and pull the operator into the moving parts.
Users must wear a protective cover on their hair, if the hair is long, to prevent it from contacting any
moving parts.
SAVE these instructions and refer to them frequently and use them to instruct other users.
NOTE: Information regarding the safe and proper operation of this tool is also available from the
following sources:
Power Tool Institute
1300 Summer Avenue
Cleveland, OH 44115-2851
www.powertoolinstitute.org
National Safety Council
1121 Spring Lake Drive
Itasca, IL 60143-3201
American National Standards Institute
23 West 43rd Street, 4th Floor
New York, NY 10036
www.ansi.org
ANSI 01.1 Safety Requirements for
Woodworking Machines and the
U.S. Department of Labor Relations
www.osha.gov
7