Wahuda 60200PC-WHD, Руководство пользователя

Страница: 10 / 39

GROUNDING INSTRUCTIONS
（
cont.
）
Make certain the extension cord is properly sized, and in good electrical condition. Always replace a
worn or damaged extension cord immediately or have it repaired by a qualified person before using it.
Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
UNPACKING & INVENTORY
Check shipping carton and machine for damage before unpacking. Carefully remove packaging
materials, parts and machine from shipping carton. Always check for and remove protective shipping
materials around motors and moving parts. Lay out all parts on a clean work surface.
Be EXTREMELY CAREFUL working around the cutter tips as they are VERY SHARP!!!
Remove any protective materials and coatings from all of the parts and the planer except for the
cutterhead. Specific cutterhead cleaning instructions follow. The protective coatings can be removed by
wiping the surfaces with a soft cloth.
NOTE: See later instructions for cleaning the cutterhead and insert tips which may be required before
operation.
NOTE: Some parts pictured may already be installed on your machine at the factory.
Go through the entire manual before contacting WAHUDA.
Compare the items to inventory figures and verify that all items are accounted for. If any parts are
missing, do not attempt to power on the machine. For missing parts, or shipping damage, contact
WAHUDA at techservices@wahudatools.com or call 877-568-8879.
10