background image

 

                                                WARRANTY                                                 

2 YEAR LIMITED WARRANTY 

WAHUDA warrants its machinery to be free of defects in workmanship and materials for a period of two (2) years from the date of the 

original purchase by the original owner. This warranty applies to products sold in United States only. The warranty does not apply to 

any product used for professional or commercial production purposes nor for industrial or educational applications. Such cases are 

covered by our 1 year Limited Warranty with the Conditions and Exceptions. 

 

Warranty does not include failures, breakage or defects deemed after inspection by an Authorized Service Center or our agent to have 

been directly or indirectly caused by or resulting from improper use, lack of or improper maintenance, misuse or abuse, negligence, 

accidents, damage in handling or transport, or normal wear and tear of any part or component. Examples are consumables such as 

inserts and knives or wear items like drive belts, bearings or brushes. Additionally, warranty is void if repairs or alterations are made to 

the machine by an unauthorized service center without the direct consent of WAHUDA.   

 

To file a claim of warranty, call toll free 877-568-8879 or emai

[email protected]

 . Warranty applies to the original buyer 

only and cannot be transferred. Your machines date of purchase and serial number have already been registered with WAHUDA when 

shipped. If you purchased your machine from one of our authorized dealers, please go online a

www.wahudatools.com

 and register 

your machine online. Thus, you will only need to provide your full name when contacting WAHUDA. 

 

The defective units should be returned Freight prepaid to WAHUDA’s Authorized Service Center for inspection. If the warranty claim is 

considered to be invalid due to exclusions listed above, WAHUDA will at your direction dispose of or return the product. In the event 

you choose to have the product returned you will be responsible for the handling and shipping cost of the return.   

 

WAHUDA furnishes the above warranties in lieu of all other warranties, express or implied. WAHUDA shall not be liable for any  special, 

indirect, incidental, punitive or consequential damages, including without limitation to loss of profits arising from or related to the 

warranty, the breach of any agreement or warranty, or the operation or use of its machinery, including without limitation damages 

arising from damage to fixtures, tools, equipment, parts or materials, direct or indirect loss caused by any other part, loss of revenue or 

profits, financing or interest charges, and claims by and third person, whether or not notice of such possible damages has been given 

to WAHUDA. Not Responsible for damages of any kind for any delay by or failure of WAHUDA to perform its obligations under this 

agreement or claims made a subject of a legal proceeding against WAHUDA more than one (1) year after such cause of action first 

arose. 

 

The validity, construction and performance of this Warranty and any sale of machinery by WAHUDA shall be governed by the law of 

the State of Tennessee, without regard to conflicts of law’s provisions of any jurisdiction. Any action related in any way to any alleged 

or actual offer, acceptance or sale by WAHUDA or any claim related to the performance of and agreement including without limitation 

this Warranty, shall take place in the federal or state courts in Shelby County, Tennessee.   

 

WAHUDA reserves the right to change the specifications of its machines without prior notice.   

Содержание 50100PC-WHD






































Отзывы: