Page 19
WAN
Connection Type
Dynamic IP –
Choose this to use DHCP to assign an address
automatically. Note that when using DHCP, you will have to
determine the IP address assigned to the zone controller
using your DHCP server or through some other method in
order to access the configuration web pages in the future.
Static IP –
Choose this to enter IP address settings
manually.
Warning: If you enter a configuration that is not
accessible from your network, you may be unable to
communicate with the zone controller! Double-check that the
settings you enter are correct before rebooting the zone
controller to apply them.
STUN
Server/Port –
If you are using a STUN server, enter your STUN
server information here. STUN servers may be required to
operate with a public SIP server from behind a NAT or router.
RTP
Port Range –
Select the UDP port range to use for sending RTP
audio network traffic during a call.
