Carina IP Display User’s Guide
Page 9
v
3.0.1.20200827
Getting Started
1.
All Carina devices should be configured within the Carina Event
Manager’s configuration webpages. While it is possible to make
changes at the device’s own webpages, any configuration changes to
the device’s webpages will be
overwritten
by the Event Manager.
2.
Locate and note your IP Display’s MAC address. It is printed on a white
sticker located on the rear of the device.
3.
Connect the IP Display’s main Ethernet port—labeled
LAN
—to a
network using a Power-over-Ethernet (PoE) Ethernet connection. When
connected, it will power on immediately, and the
LINK/ACTV
status LED
will begin to blink.
4.
Your Carina Event Manager will automatically detect the IP Display
when you power up and connect to the network via PoE.
5.
On the Event Manager’s Web interface, navigate to the Devices page to
discover your IP Display’s IP address. Look for the device matching the
MAC address you just noted.
6.
Following the instructions in the next sections, change Event Manager
settings for your IP Display as needed.
7.
To apply changes and settings to your IP Display, save changes and
reprovision your IP Display. This is an important step!
Your changes in
Event Manager will not take effect until you have reprovisioned the
endpoint.
