www.wahsega.com
Page 5
LINE IN +
Consumer line input level (-10dBV)
LINE IN -
Consumer line input level (+10dBV)
LED 1
Unused
LED 2
Unused
INPUT 1
Contact closure to ground (
12 V RTN
).
Connect a
Panic Button
using
Input 1
and
12 V RTN
(GND)
.
INPUT 2
Unused
INPUT 3
Unused
RELAY 1: NO
Isolated dry contact closure. Normally Open.
RELAY 1: COM
Isolated dry contact closure. Common.
RELAY 1: NC
Isolated dry contact closure. Normally Closed.
UNUSED
Not used at this time.
LAN / POE
To use Power-over-Ethernet (PoE), route a Cat 5 or Cat 6 Ethernet cable
through a PoE injector to the LAN/POE port.
Once the unit is successfully powered, the LINK/ACTV indicator
LED will begin to blink.
