Wahlberg Winch 50 Double, Руководство пользователя

Страница: 17 / 29

17
246.805.201
Date: 2017-09-26
Lifting wire power
Warning! Read “Safety Information” on page 2 before connecting AC mains power
to the lifting wire.
Warning! Socket outlets or external power switches used to supply the lifting wire
attachment with power must be located near the winch and easily accessible so
that the lifting wire attachment can easily be disconnected from power.
Power voltage
Warning! Check that the voltage range specified on the winch’s serial number label
matches the local AC mains power voltage before applying power to the winch. Do
not apply AC mains power to the winch at any other voltage than that specified on
the winch’s serial number label.
Lifting cable connection plug
The Winch 50 requires power input via a Neutrik PowerCON True1 cable connector.
The cable for connecting the PowerCON True1 plug on the winch for the lifting wire
power and data, must meet the requirements listed under “Protection from electric
shock” on page 2.
The lifting wire has tree conductors; two for power and one for ground.
Connecting the power cable
Refer to the section “AC power” on page 10Fejl! Bogmærke er ikke defineret. for
installation of the power connection.