Heat-Prober
®
Platinum-RTD Thermometers User Manual
2
RECEIVING INSPECTION
Check your new Wahl Portable Platinum Heat-Prober
®
Thermometer upon receiving to
assure that:
1. It has not been physically damaged in transit.
2. All parts are included.
Then, plug in the probe at top and turn it on to see that it reads room temperature.
If a fault is determined,
take the following steps:
1.
Notify the Wahl factory of
the difficulty. Give number and description. Wahl will issue a
Return Merchandise Authorization, and notify our service department to receive the unit.
2. Return the instrument in its shipping container to the factory, freight prepaid.
Repairs will be made under warranty or at regular service cost.
Warranty: Heat-Prober
®
Meters
Wahl Instruments, Inc., hereinafter referred to as Wahl, warrants each instrument of its
manufacture to be free from defects in material and workmanship under normal use and service.
Wahl agrees to repair or replace any product which upon examination is revealed to have been
defective due to faulty workmanship or material if returned to our factory, transportation charges
prepaid, within three years from the date of shipment. This warranty is in lieu of all other
warranties, expressed or implied and of all obligations or liabilities on its part for damages
including but not limited to consequential dam- ages, following the use or misuse of instruments
sold by Wahl. No agent is authorized to assume for Wahl any liability except as set forth above.
Warranty: Temperature Probes and Meter Accessories
Wahl warrants its Hand-Held Meter Temperature Probes to be free of defects in workmanship or
material. Due to the environmental nature of their use, probes cannot be replaced without cost
unless returned unused within a 30- day period. Wahl assumes no liability for damages of any
kind, direct or indirect, as a result of installation and/or use of its products; nor any costs
resulting from removing and reinstalling any of its products for replacement under terms of this
warranty.
