9
Battery/Rechargeable Trimmer
power when the lights are turned off.
3.Be sure that the trimmer is properly connected to the recharging
transformer and that all connections are secure with the switch on the
trimmer turned to the “OFF” position
4.When connecting the charger cord to the unit, be certain the groove on
the end of the cord is facing down. This will then fit over the raised notch
in the opening around the unit’s charger pins.
5.If your electricity is connected to a master power switch, we would
suggest the trimmer be disconnected from the charger when the master
switch is off, to prevent discharging of the battery.
6.If the trimmer does not run and it is completely charged, turn “ON” and
pinch or push the blades manually.
CARING FOR YOUR “WHAT A SHAVER”
The blades are the single most important part of this trimmer. Keep hair
and abrasive particles from collecting between the blades. Blades do
not only become dulled from cutting hair, they are dulled by the abrasive
particles in the hair dirt, sand etc. If abrasive particles are picked up and
carried between the blades, the particles tend to hold the blades apart and
cause pulling instead of cutting.
OILING BLADES
For every use, put a drop of Wahl Clipper Oil on the blades only when
necessary. Motor bearings are permanently lubricated do not attempt to
oil. Store oil packet in an upright position.
