Wahl 8467, Руководство пользователя

Страница: 6 / 7

Cause: Gap between the front edge of the bottom blade and the front edge of the top blade is not correctly aligned.
f
Align the bottom blade (Fig. 7).
Appliance is not working.
Cause: Defective power supply.
f
Make sure that contact between the appliance plug and the socket is faultless. Check the mains cable for possible damage.
f
Check the power supply.
DISPOSAL
Handle with care! Environmental damage in the case of incorrect disposal.
f
Correct disposal will ensure environmental protection and prevent any potentially harmful impact on people or the environment.
Adhere to the relevant legal requirements when disposing of the appliance.
Information on the disposal of electrical and electronic appliances in the European Community.
Within the European Community, national regulations are specified for the disposal of electrical appliances, based on EU Waste Electrical and Electronic Equip-
ment Directive 2002/96/EC (WEEE). In accordance with this, the appliance can no longer be disposed of with the local or domestic waste.
The appliance will be accepted free of charge by local collection points or recycling centres.
PRODUCT REGISTRATION
Wahl are constantly developing and launching new products in the UK. We would like to understand your product needs and expectations and we value any comments you may
have. As part of Wahl Customer Care, we are offering you the chance to be kept up to date with the latest product launches, innovations and special offers.
Please take a minute to register your product online at www.wahl.co.uk.
WIRING
W ARNING: If the supply cord is damaged it must be replaced by the manufacturers service agent or a similarly qualified person in order to avoid a
hazard.
The wires in the mains lead are coloured in accordance to the following code:
Blue Neutral (N) Brown live (L)
This lead is fitted with a 3 pin plug which has a 3 amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged, it should be cut off and disposed of, and a suitable plug fitted as detailed below.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter ‘N’ or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter ‘L’ or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with the letter ‘E’ or has the Earth symbol, or coloured GREEN or GREEN/YELLOW.
This lead has been specifically designed for use with Wahl professional mains powered clippers and should not be used with any other product.
Wahl (UK ) Ltd. accept no responsibility for any accidental injury or damage resulting from the incorrect fitting of this product.
GUARANTEE
This product is guaranteed against defects in material and workmanship for a period of one year from the date of original purchase or receipt as a gift.
Should this product become defective during the guarantee period, return it to the store of purchase together with your proof of purchase for repair or
replacement.
Alternatively within the guarantee period you can return the product to Wahl (UK) Ltd who will repair any such defect or elect to replace the product or any
part of it, without charge, provided there is proof of purchase. Should a replacement be offered this will not extend the original guarantee period.
The guarantee becomes invalid in the case of misuse, alteration or repair by unauthorised persons.
This guarantee does not include blades, cables, shaver heads, foils and cutters etc., which are consumable parts.
This guarantee in no way affects your rights under law in the United Kingdom.
WAHL (UK) LIMITED
HERNE BAY TRADE PARK
SEA STREET
HERNE BAY
KENT
CT6 8JZ.
CUSTOMER SERVICES T : 01227 740066
www.wahl.co.uk
Form No. Z202 Rev5 10-13