14
E N G L I S H
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
1430-1000 00 - 07-2022
14
G
Plug-in power supply with plug plate
H
Device connector plug
I
Blade guard (for storage)
J
Comb attachment (3 mm, 6 mm, 9 mm, 12 mm)
K
Cleaning brush
L
Oil for the cutting set
Technical data
Type
Professional mains /
battery hair clipper
Cutting system
adjustable cutting set
Cutting set width
46 mm
Cutting length
0.7 - 3 mm
Drive
DC motor
Operating mode
mains / battery (Two Way)
Battery type
Lithium-ion
Battery operating
time up to 180 minutes
Charging time battery
approx. 140 minutes
Dimensions (L x W x H)
175 x 50 x 46 mm
Weight
approx. 286 g
Emission sound pressure level < 70 dB(A) @ 25 cm
Vibration
< 2.5 m/s2
Plug-in power supply
Manufacturer
E-TEK Electronics Manufactory Co, LTD
B, 3 Bldg Tangwupu Industrial Park,
Yan-chuan, Songgang Subdistrict, Bao‘an
District, 518105 Shenzhen, Guangdong
PEOPLE’S REPUBLIC OF CHINA
Type ZD018B050200
Input voltage
100-240 V AC
Input AC frequency
50-60 Hz, 0.8 A
Output voltage
5.0 V
Output current
2.0 A
Output power
10.0 W
Average efficiency during
operation 78.7
Power consumption
upon zero load
0.1 W
Operating conditions
Environment
0°C - +40°C
The appliance is insulated and suppressed against radio-interference. It
meets the requirements of the EU Electromagnetic Compatibility Directive
2014/30/EU and the Machinery Directive 2006/42/EC.
Operation
Preparation
Keep the packaging material for later safe storage or transport.
f
Check the completeness of the scope of delivery.
f
Check all parts for possible transport damage.
f
In case of transport damage, contact your dealer.
Safety
Caution! Damage due to incorrect voltage supply.
f
Only operate the appliance with the operating voltage
specified on the type plate of the appliance or on the plug-in
power supply.
f
Only operate the appliance with the plug-in power supply
appliance supplied.
Charge the battery
1. Use the on/off switch to switch the appliance off (Fig. 2 - 2).
2. Insert the appliance connection plug of the plug-in power supply into
the appliance socket (Fig. 4 - 1).
·
Intelligent charging management prevents overcharging of
the battery.
·
The ideal ambient temperature for charging is between 15 °C
and 35 °C.
3. Plug the plug-in power supply into the mains socket (Fig. 4 - 2).
The charging process begins.
·
During charging, the battery capacity indicator (E) lights up
red
. When the battery is fully charged, the battery capacity
indicator lights up in a constant
green
.
Battery operation
1. Switch the appliance on with the on/off switch (Fig. 2 - 1).
·
The battery charge level is indicated by the battery capacity
indicator (E):
– LED off = 100 % - 10
– LED flashes
red
= 10 % - 0 %
·
When the battery is discharged, the appliance switches off
automatically.
2. Use the on/off switch to switch off the appliance after use (Fig. 2 - 2).
Mains operation
Caution! Damage caused by using the hair clipper
with the plug-in power supply permanently plugged in
(mains operation).
The hair clipper is not intended to be used with a plug-in power
supply permanently plugged in (mains operation). The con-
nection cable of the plug-in power supply is not designed for
mechanical stress in continuous operation.
f
Mains operation is only recommended for a short time, in
case of an empty battery.
3. Insert the appliance connection plug of the plug-in power supply into
the appliance socket (Fig. 4 - 1).
4. Plug the plug-in power supply into the mains socket (Fig. 4 - 2).
5. Switch the appliance on with the on/off switch (Fig. 2 - 1).
6. Use the on/off switch to switch the appliance off again after use
(Fig. 2 - 2).
