5
James Martin Stand Mixer
BEFORE USING MIXER
Clean the appliance and parts before first use. Wash attachments and mixing
bowl in warm soapy water. See section CLEANING AND MAINTENANCE.
Before assembling the mixer, be sure the power cord is unplugged from the
power outlet and the speed selector is in the off position.
1. By depressing the tilt button, the head of mixer will automatically release
and lock into tilt position. Place your hand on the top of the mixer and
allow the head of the mixer to rise gently.
2. Select the desired attachments, depending on the mixing task to
be performed: beater or whisk for mixing and beating, dough hook for
kneading.
3. Insert the desired attachment by pushing up and twisting until it locks
into position.
NOTE
: Ensure the beater or dough hook or whisk is fully inserted into the
socket, otherwise your mixing results may be affected.
4. Place bowl into position on the base, then turn the bowl clockwise
until it locks into position (see fig.1).
5. To lower the head and place the beater, dough hook or whisk into the bowl,
hold the top of the mixer and gently push the head down until it clicks into
position
6. To use the splash guard lift the head of your mixer and fit onto the top of
the mixing bowl. (see fig.1).
NOTE
: If the beater is right at the back of its mixing position it is possible that
it could catch against the edge of the splash guard. So take care as you raise
the head of the mixer.
Fig. 1
11. Never carry the unit by its power cord.
12. Use this appliance only for its intended purpose.
