WAGO 879-3000 4PU, Руководство по эксплуатации

Страница: 29 / 39

WAGO Operating Instructions 4PU/4PS/2PU CT 29
Appendix 1 – Multi-Tariff Function
A1.1 Switching Tariffs between T1 and T2
The energy meter can optionally assign the measured values to different tariffs. Tariffs T1 and T2 can be controlled
via an external tariff switch.
Once there is a voltage of 230 VAC at terminal blocks 10 and 11, the meter switches to Tariff 2 and writes the
measured values to the register provided for T2.
A1.2 Switching Tariffs to T3 and T4
Tariffs 3 and 4 can be enabled directly on the meter using the sensitive buttons or via the
Bluetooth
®
, Modbus
®
or M-
Bus communication channels. Values that are included in these registers can also be found in area 2 (MID-relevant
area) of the display. All values that are included in this area can no longer be removed or reset.
4PS
4PU
2PU CT