WAGO-ETHERNET-Zubehör 852
Important Notes
13
852-1112 8-Port 1000BASE-T-Industrial-Eco-Switch
Manual
Version 1.1.0FW/HW-Version 01/01
Pos: 15.15 /Alle Serien (Allgemeine M odul e)/Rechtliches, Allgemeines/Spezi elle Einsatzbesti mmung en für ETH ERN ET-Geräte - Ü berschrift 2 und Inhalt @ 12\mod_1336642945500_21.docx @ 94792 @ 2 @ 1
2.3
Special Use Conditions for ETHERNET Devices
If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
•
Do not connect control components and control networks to an open
network such as the Internet or an office network. WAGO recommends
putting control components and control networks behind a firewall.
•
Limit physical and electronic access to all automation components to
authorized personnel only.
•
Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
•
Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
•
If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
•
Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
•
Use “defense-in-depth” mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Pos: 16 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
