20
Device Description
EPSITRON® COMPACT Power
787-1202 / -1212 / -1216 / -1226 EPSITRON® COMPACT Power
Manual
Version 1.0.0
Pos: 25 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Anschl üsse - Ü berschrift 2 @ 4\mod_1240984262656_21.docx @ 31961 @ 2 @ 1
3.3
Connectors
Pos: 26.1 /All e Seri en ( Allgemei ne Module)/Sicherheits- und sonstige Hi nweise/Gefahr/Gefahr: Nicht an Ger äten unter Spannung arbeiten! @ 6\mod_1260180365327_21.docx @ 46727 @ @ 1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: 26.2 /Serie 787 (
EPSITRON
)/Wichtige Erläuterungen/Sicher heits- und sonstige Hi nweise/Achtung/Achtung: F ederl eisten nicht unter Last stecken oder zi ehen! @ 18\mod_1392900217463_21.docx @ 145941 @ @ 1
Do not plug in or disconnect the female connector while a load is applied!
Only plug in or disconnect the female connectors when the device is not live!
Failure to observe this can result in damage to the contacts due to arcing!
Pos: 26.3 /Serie 787 (
EPSITRON
)/Wichtige Erläuterungen/Sicher heits- und sonstige Hi nweise/Achtung/Achtung: F ederl eisten bis zum Anschlag i n die Stiftleisten stecken! @ 18\mod_1392902889021_21.docx @ 145944 @ @ 1
Plug the female connectors all the way into the male connectors!
Always plug the female connectors all the way in to the male connectors. This
ensures proper contact at all times.
Pos: 26.4 /Serie 787 (
EPSITRON
)/Wichtige Erläuterungen/Sicher heits- und sonstige Hi nweise/Achtung/Achtung: Fr eischwingende Leiterenden durch eine g eeignete Z ugentl astung abfangen! @ 18\mod_1392904262758_21.docx @ 146008 @ @ 1
Attach the free ends of the conductors using a strain relief device!
Female connectors can be pulled out of the male connectors by high vibration
levels or shock impacts!
Provide appropriate strain relief means to attach and cap any free ends of the
conductors!
Pos: 26.5 /Serie 787 (
EPSITRON
)/Ger ätebeschrei bung/Anschl üsse/Anschl üsse 787-12xx @ 19\mod_1397650449844_21.docx @ 151899 @ 344 @ 1
3.3.1
Connectors
The supply lines are connected on the input and output side using the 2092 Series
WAGO
picoMAX
®
pluggable connectors:
•
Input side:
picoMAX
®
5.0
•
Output side:
picoMAX
®
5.0
Observe the maximum admissible conductor cross sections for the signal and
power cables (see section “Device Description” > “Technical Data”).
Check the appropriate operating voltage before connecting equipment (see type
plate).
Additional information on the connection technology is provided in the section
“Connecting Devices.”
