WAGO-SPEEDWAY 767
Process Image
77
767-5801/000-800 8DIO 24V DC 0.5A IF (8xM8)
Manual
Version 1.1.0
8.5
DIO Mode + 2 Counters
8.5.1
Input Data
The image for the process data, which is transmitted from the I/O module to the
fieldbus coupler, has a size of 6 bytes. If you configure synchronous diagnostic
data for the I/O module, the process image has a size of 8 bytes.
The byte configuration is as follows:
Table 46: DIO + 2 counters, input data in the process image
Byte 0 7
0
Digital inputs (process data)
\
-------------------
\/
-------------------
/
1
B
: Input value = True
State of the outputs is also displayed.
Byte 1 7
0
Counter status
\
-------------------
\/
-------------------
/
1
B
: See section “Counter Function”.
Byte 2 15
8
Counter value 1
\
-------------------
\/
-------------------
/
8 bits data. See section “Counter Function”.
Byte 3 7
0
Counter value 1
\
-------------------
\/
-------------------
/
8 bits data. See section “Counter Function”.
Byte 4 15
8
Counter value 2
\
-------------------
\/
-------------------
/
8 bits data. See section “Counter Function”.
Byte 5
7
0
Counter value 2
\
-------------------
\/
-------------------
/
8 bits data. See section “Counter Function”.
