765-1202/0100-0000
Commissioning
Product manual | Version: 1.0.0
65
16DIO FLD EC DC 24V 2.0A
10.3.1.4.5 Resetsetting the Module to the Factory Settings
In many cases, it can be helpful to reset the module to the factory settings. This can be
done for various selectable classes of settings with the
Settings
menu item on the
Fac-
tory reset
tab.
Figure 18:
Settings
Menu Item,
Factory Reset
Tab
Changes to settings require operator or admin rights. If you do not have these, the
Set-
tings
tab is grayed out and cannot be edited.
Various settings can be reset according to the radio button selection:
Table 43: Options for Resetting the Module to the Factory Settings
Option
Reset Settings
Reset Device Informa-
tion
Module settings (e.g., maintenance information, system time settings)
Reset Network Adapter
Settings
Network adapter settings (communication settings, IP address configuration, sta-
tion name)
Reset Application Pa-
rameters
Application-specific data (port configuration and parameters, remanent parame-
ters)
Reset All
All Settings
To reset the module to the factory settings, proceed as follows:
1. In the left-hand column of the WAGO I/O Field Webserver, click the
Settings
menu
item.
ð
The
Device configuration
tab appears.
2. Select the
Factory reset
tab.
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values.
4. Click the
[[Reset]]
button.
ð
The selected settings are reset to the factory settings.
10.3.1.4.6 Configure Bluetooth
The
Bluetooth
®
tab provides the following functions:
