58
Appendix
WAGO-I/O-SYSTEM 758
758-915
Bluetooth
®
ETHERNET Gateway
Manual
Version 1.1.0, applicable from FW/HW Version 01/01
8.1.4
One or More WEGs at a Generic
Bluetooth
®
NAP
A link can be set up to any
Bluetooth
®
network access point (NAP) using a WEG
to enable communication with devices in its ETHERNET segment. The following
settings must be made for this in the Web-based Management System in the
WEG:
Table 29: One or More WEGs at a Generic
Bluetooth
®
NAP
Group, Subgroup, Parameter
Value
Bluetooth, Security, Passkey
Identical to the item selected at the access
point.
Bluetooth, Security, Security Mode Identical to the item selected at the access
point.
Bluetooth, WLAN coexistence,
Low emission mode
Off
Bluetooth, Connection,
Bluetooth Address
MAC address of the access point, if known;
otherwise leave blank.
Bluetooth, Connection,
Device Name
If you do not know the MAC address for the
access point enter the device name for the
access point; otherwise leave blank.
Bluetooth, Connection,
Remote role
NAP
The access point must normally be properly configured before a link can be
established. Information necessary for this can be found in the documentation for
the specific device.
