WAGO 751-5701, Руководство пользователя

Страница: 11 / 18

751-5701 [AS-Interface Module 4IN/4OUT 24V/2A Single] • 11
Display Elements
WAGO-I/O-SYSTEM 751
AS-Interface Components IP20
2.1.1.4 Display Elements
Tab. 2.1.1-3: Display Elements
LED Designation Status Function
off Input 1, Signal voltage (0)
I1
yellow
Status
DI1
on Input 1, Signal voltage (1)
off Input 2, Signal voltage (0)
I2
yellow
Status
DI2
on Input 2, Signal voltage g (1)
off Input 3, Signal voltage (0)
I3
yellow
Status
DI3
on Input 3, Signal voltage (1)
off Input 4, Signal voltage (0)
I4
yellow
Status
DI4
on Input 4, Signal voltage (1)
off Output 1, reset
O1
yellow
Status
DO1
on Output 1, set
off Output 2, reset
O2
yellow
Status
DO2
on Output 2, set
off Output 3, reset
O3
yellow
Status
DO3
on Output 3, set
off Output 4, reset
O4
yellow
Status
DO4
on Output 4, set
off OK
on Configuration error
FLT
red
Error
blinking
Short circuit / sensor supply
overload or actuator supply
is missing or output driver
error message (Open-Load-
Detection)
off AS-Interface supply error
ASI
green
AS-Interface
supply
on AS-Interface supply OK
off Actuator supply error
O3 O1 O4 O2
FLT ASI
AUX
I3 I4 I1 I2
Fig. 2.1.1-5: Display
Elements
gq57012x
AUX
green
Actuator
supply
on Actuator supply OK
2.1.1.5 Operating Elements
The AS-Interface module 751-5701 has no operating elements.