30 Process Image
WAGO I/O System 750
750-537 8DO 24V DC 0.5A, diagnostics
Manual
Version 1.2.0
4
Process Image
Mapping of process data in the process image of fieldbus systems
The representation of the process data of some I/O modules or their variants in
the process image depends on the fieldbus coupler/controller used. Please take
this information from the section “I/O Modules” included in the description
concerning the process image of the corresponding coupler/controller.
Table 16: Output Bits
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
DO 8
DO 7
DO 6
DO 5
DO 4
DO 3
DO 2
DO 1
DO 1
Signal state DO 1 – Digital output channel 1
DO 2
Signal state DO 2 – Digital output channel 2
DO 3
Signal state DO 3 – Digital output channel 3
DO 4
Signal state DO 4 – Digital output channel 4
DO 5
Signal state DO 5 – Digital output channel 5
DO 6
Signal state DO 6 – Digital output channel 6
DO 7
Signal state DO 7 – Digital output channel 7
DO 8
Signal state DO 8 – Digital output channel 8
Table 17: Input Bits
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
DIAG 8 DIAG 7 DIAG 6 DIAG 5 DIAG 4 DIAG 3 DIAG 2 DIAG 1
DIAG 1
Diagnostic state DO 1 – Digital output channel 1
DIAG 2
Diagnostic state DO 2 – Digital output channel 2
DIAG 3
Diagnostic state DO 3 – Digital output channel 3
DIAG 4
Diagnostic state DO 4 – Digital output channel 4
DIAG 5
Diagnostic state DO 5 – Digital output channel 5
DIAG 6
Diagnostic state DO 7 – Digital output channel 6
DIAG 7
Diagnostic state DO 7 – Digital output channel 7
DIAG 8
Diagnostic state DO 8 – Digital output channel 8
