WAGO 750-483/040-000 Скачать руководство пользователя страница 14

Страница: 14 / 52

14 Device Description

WAGO-I/O-SYSTEM 750 XTR

750-483/040-000 2AI 0-30 VDC Diff XTR

Manual

Version 1.1.0

Device Description

The 750-483/040-000 I/O module (2AI 0-30 VDC Diff XTR) processes differential

signals of a magnitude of 0 … 30 VDC from the field range.

The I/O module has 2 input channels for differential signals. The sensors may be

received via the CAGE CLAMP

connAI 1 and

−

AI 1 or +AI 2 and

−

AI 2.

The shield connection is fed directly to the carrier rail and contact is made

automatically by snapping the module onto the rail.

The assignment of the connections is described in the “Connectors” section.

Connection examples are shown in section “Connect Devices” > … >

“Connection Example(s)”.

The input signal is electrically isolated and is transmitted with a resolution of

14 bits.

The operational readiness and the trouble-free local bus communication of the

channels are indicated via a green function LED.

One red error LED per channel indicates when the measuring range is exceeded

or falls below for the respective channel.

The meaning of the LEDs is described in the “Display Elements” section.

Power to the internal electronics is supplied via internal data bus.

Power from SELV/PELV power supply only!

All field signals and field supplies connected to this XTR I/O module

(750-483/040-000) must be powered from SELV/PELV power supply(s)!

Both the potential groups and the individual modules within these groups can be

arranged in any combination when designing the field bus node.

Use a power supply module!

Use a power supply module for field-side power supply of downstream I/O

modules.

Mixed operation

Mixed operation (standard/XTR modules) within a node is possible when groups

of modules are electrically isolated on the field side (i.e., electrically isolated

power supply).

Содержание 750-483/040-000





















































Результаты поиска

Содержание 750-483/040-000

Отзывы:

Похожие инструкции для 750-483/040-000

Бренды по названию

Популярные бренды

WAGO 750-483/040-000, Руководство пользователя

Результаты поиска

Содержание 750-483/040-000

Отзывы:

Похожие инструкции для 750-483/040-000

Бренды по названию

Популярные бренды