WAGO 750-481/040-000 Скачать руководство пользователя страница 44

Страница: 44 / 72

44 Connect Devices

WAGO I/O SYSTEM 750 XTR

750-481/040-000 2AI RTD Ex i XTR

Manual

Version 1.1.0

6.2

Power Supply Concept

Ex i XTR I/O modules shall only be supplied via “Power Supply 24 VDC

Diagn for Ex i XTR Modules”

Ex i XTR I/O modules shall only be operated with a “Power Supply 24 VDC

Diagn for Ex i XTR Modules” 750-606/040-000.

Requirements for Clearances and Creepage Distances

For all sections of a node that contain I/O modules for Ex-i use, stricter require-

ments with regard to clearances and creepage distances apply.

•

Before such a node section, the respective

Power supply 24 VDC Diagn

for Ex i XTR Modules

(

750-606/040-000

) ensures the required distance.

•

After such a node section,

4 Distance Modules XTR (750-616/040-000)

must be used.

Exception: If the following section consists only of an

End Module XTR

(750-600)

, no distance modules are required.

Do not exceed maximum current via power contacts!

The maximum current available from the “Power Supply 24 VDC Diagn for Ex i

XTR Modules” 750-606/040-000 is 1 A.

When configuring the system, ensure that this current is not exceeded.

If exceeded, an additional 750-606/040-000 must be used.

Keep the air and creep distances between intrinsically safe segments!

The maximum current available from the 750-606/040-000 “Power Supply

24 VDC Diagn for Ex i XTR Modules” is 1 A.

If the use of further 750-606/040-000 is necessary for reasons of extent of

utilization, 4 Distance Modules XTR (750-616/040-000) must be used to

guarantee the distance between the intrinsically safe segments.

Further information about explosion prevention!

Further information about explosion prevention can be found in section “Use in

Hazardous Environments”!

The Ex i XTR I/O module (750-481/040-000) receives the 24 V voltage supply

potential and the 0V potential for the field level from an upstream Ex i XTR I/O

module or from the “Power Supply 24 VDC Diagn for Ex i XTR Modules” 750-

Содержание 750-481/040-000









































































Результаты поиска

Содержание 750-481/040-000

Отзывы:

Похожие инструкции для 750-481/040-000

Бренды по названию

Популярные бренды

WAGO 750-481/040-000, Руководство пользователя

Результаты поиска

Содержание 750-481/040-000

Отзывы:

Похожие инструкции для 750-481/040-000

Бренды по названию

Популярные бренды