WAGO 750-431/040-000 Скачать руководство пользователя страница 9

Страница: 9 / 50

WAGO-I/O-SYSTEM 750 XTR

Important Notes

750-431/040-000 8DI 24 VDC 0.2ms XTR

Manual

Version 1.1.0

prototype test certificate must be obtained that confirms the correct installation of

the system in a housing or switch cabinet.

The implementation of safety functions such as EMERGENCY STOP or safety

door monitoring must only be performed by the F I/O modules within the modular

WAGO-I/O-SYSTEM 750. Only these safe F I/O modules ensure functional

safety in accordance with the latest international standards. WAGO's

interference-free output modules can be controlled by the safety function.

2.1.4

Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. These

modules contain no parts that can be serviced or repaired by the user. The

following actions will result in the exclusion of liability on the part of WAGO

Kontakttechnik GmbH & Co. KG:

•

Repairs,

•

Changes to the hardware or software that are not described in the

operating instructions,

•

Improper use of the components.

Further details are given in the contractual agreements. Please send your

request for modified and new hardware or software configurations directly to

WAGO Kontakttechnik GmbH & Co. KG.

2.1.4.1 Disposal

2.1.4.1.1 Electrical and Electronic Equipment

Electrical and electronic equipment may not be disposed of

with household waste. This also applies to products without

this symbol.

Electrical and electronic equipment contain materials and substances that can be

harmful to the environment and health. Electrical and electronic equipment must

be disposed of properly after use.

WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary

nationally.

Environmentally friendly disposal benefits health and protects

the environment from harmful substances in electrical and

electronic equipment.

Содержание 750-431/040-000



















































Результаты поиска

Содержание 750-431/040-000

Отзывы:

Похожие инструкции для 750-431/040-000

Бренды по названию

Популярные бренды

WAGO 750-431/040-000, Руководство пользователя

Результаты поиска

Содержание 750-431/040-000

Отзывы:

Похожие инструкции для 750-431/040-000

Бренды по названию

Популярные бренды