WAGO 750-344 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 82

WAGO 750-344 Скачать руководство пользователя страница 54

54

•

Feldbus Coupler 750-344 / -345

Process

Image

WAGO-I/O-SYSTEM

750

INTERBUS

Based on this break-down, the first addresses assigned in the configuration are
reserved for analog inputs and outputs. Counting is from left to right,
beginning with the first analog channel next to the bus coupler.

3.1.4.3 Bus Modules Process Images on the Interbus

The status bytes (S), control bytes (C) and data bytes (D0...Dn) for for byte-
and word-oriented modules are mapped in the Motorola format on the
Interbus.

NOTE:

For the significance of input and output bits/bytes of the individual I/O
modules, please refer to the corresponding description of the I/O modules.

3.1.4.3.1 2 DI Modules

750-400, 750-401, 750-405, 750-406, 750- 410, 750-411,750-412

Process Image in [Bit]

Input

Output

INTERBUS 2

0

3.1.4.3.2 2 DI Modules with Diagnostics

750-419, 750-425 (1 bit diagnostics / channel)

Process Image in [Bit]

Input

Output

INTERBUS 4

0

750-418 (1 bit diagnostics / channel, 1 bit confirmation / channel)

Process Image in [Bit]

Input

Output

INTERBUS 4

4

«
...
52
53
54
55
56
...
»

Содержание 750-344



















































































Отзывы:

Нет отзывов