manualshive.com logo in svg

WAGNER Wildcat 18-40, Перевод оригинального руководства по эксплуатации, Страница: 34 / 80

Поделиться
Скачать
WAGNER Wildcat 18-40 Скачать руководство пользователя страница 34

34

Wildcat & Puma 40 cm

3

3

2

B_05519

3

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2303659

7.2.1 

GENERAL RULES FOR MAKING ADJUSTMENTS TO THE SPRAY GUN

High-pressure spray jet!

Danger to life from injecting paint or solvent.

  Never reach into the spray jet.
  Never point the spray gun at people.
  Consult a doctor immediately in the event of skin injuries caused 

by paint or solvent. Inform the doctor about the paint or solvent 
used.

  Never seal defective high-pressure parts; instead relieve the 

pressure from them and replace them immediately.

  Use personal protective equipment (protective clothing, gloves, 

eyewear and respiratory protection).

WARNING

  Observe the spray gun operating manual.

In the case of unforeseen occurrences, immediately:

  - Close ball valve (2);

  - Open return valve (3).

Close

Open

7.3 

EMERGENCY STOP

Open:

High-pressure fi lter 270 bar

High-pressure fi lter 530 bar

Gas mixtures can explode if there is an incompletely filled 
pump!

Danger to life from fl ying parts.

  Ensure that the pump and suction system are always completely 

filled with fl ushing agent or working material.

  Do not spray the device empty after cleaning.

WARNING

Содержание Wildcat 18-40

















































































Отзывы:

Нет отзывов