WAGNER Wildcat 18-40, Руководство по обслуживанию

Страница: 10 / 100

10
40 ccm - 300 ccm .
SERVICE MANUAL
EDITION 01/2012 PART NO. DOC367866
2.4.1
CORRECT USE
2.4.2
EXPLOSION PROTECTION IDENTIFICATION
2.4.3
IDENTIFICATION X
2.4
USE IN AN EXPLOSION HAZARD AREA
4HEUNITISSUITABLEFORWORKINGLIQUIDMATERIALSINACCORDANCEWITHTHECLASSIlCATIONINTO
EXPLOSIONCLASSES
As defined in the Directive 94/9/EC (ATEX 95), the unit is suitable for use in areas where
there is an explosion hazard.
II 2G IIB c T3 X
CE: Communautés Européennes
Ex: Symbol for explosion protection
II:
Unit class II
2: Category 2 (Zone 1)
G: Ex-atmosphere gas
IIB: Explosion
group
c: Constructional security
T3: Temperature class: maximum surface temperature < 200 °C; 392 °F.
X: Special Notes (see chapter 2.4.3)
Maximum surface temperature
The maximum surface temperature of the piston pump can be reached if it runs dry.
œ
Ensure that the piston pump is filled with sufficient working or cleaning medium.
œ
Ensure that the separating fluid container is filled with sufficient separating fluid.
Ignition temperature of the coating material
œ
Ensure that the ignition temperature of the coating material is above the maximum
surface temperature.
Ambient temperature
œ The permissible ambient temperature is +5 °C to +60 °C; +41 °C to 140 °F
Medium supporting atomizing
œ To atomize the material, use only weakly oxidizing gases, e.g. air.
Mechanical sparks can form if the unit comes into contact with metal
In an explosive atmosphere:
œ
Do not knock or push the unit against steel or rusty iron.
œ
Do not drop the unit.
œ
Use only tools that are made of a permitted material.