WAGNER WallPerfect W 995, Оригинальная инструкция по эксплуатации

Страница: 34 / 96

D
32
WallPerfect W 995 GB
32
WallPerfect W 995
12.
Multifunction switch settings (ig.
4, A)
FILL/
CLEAN 
Settings for cleaning and
pre-illing the system
OFF  System is of
ON 
Operating setting
13. Setting the low rate (ig. 4, B)
The material quantity is set depending on the characteristics of the material (viscosity)
and the working speed of the operator.
This setting can be made variably with the material low limiter:
lower material

turn to the left
higher material

turn to the right
i
We recommend starting with a low material low setting and then gradually
adjusting this to suit needs. .
14. Setting the width of the spray jet on the spray lance
(Fig. 5)
A = wide spray jet
(green)
 For coating larger surfaces
 Working with a large low
rate (green area on quantity
scale)
B = narrow spray
jet (red)

For coating smaller areas,
corners and edges

Working with a small low
rate (red area on quantity
scale)
A B
OFF
Fill/
CLEAN

A B
