WAGNER W 575 FLEXIO, Руководство по эксплуатации

Страница: 14 / 26

14
W 575 Flexio AUS
•
Never open the device yourself in order to carry out repairs in the electrical system!
•
The units may only be used with a functional valve. If paints rises in the ventilating
hose (Fig. 1, item 15) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Nozzle 2) Air cap (to set the working direction)
3) Union nut 4) Spray jet width adjustment
5) Wall Extra I-Spray spray attachment 6) Material volume adjustment
7) Air volume control 8) Spray gun rear part
9) Air filter cover 10) ON/OFF switch (located on both sides)
11) Trigger 12) Mains lead
13) Container 14) Valve
15) Ventilating hose 16) Stirring rod
17) Feed hopper (2 pcs.) 18) Practice poster
19) Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
Many different coating substances can be processed with the W 575.
A different spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Interior and exterior water based acrylic
wall, ceiling and fence paints, primers
and undercoats.
Wall Extra I-Spray
6. Coating Materials Suitable for Use
Interior and exterior water based acrylic wall, ceiling and fence paints, primers and
undercoats.
The following materials can only be processed with optional accessories:
Water and oil based stains, lacquers, clear finishes and wood preservatives.