WAGNER W 125, Руководство по эксплуатации

Страница: 9 / 14

9
W 125
GB
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Air Cap 2) Nozzle
3) Union nut with material volume regulation 4) Trigger
5) ON/OFF switch
6) Air filter
7) Container
5. Coating Materials
Coating Materials Suitable for Use
Glazes, Wood preservatives undiluted
Paints containing solvents and water-soluble paints, primers dilute by 5 - 10%
Coating Materials Not Suitable for Use
Wall paints, materials that contain highly abrasive components, facade paint, caustic
solutions and acidic coating substances. Flammable materials.
Paints, varnishes and glazes can be sprayed undiluted or slightly diluted. Paints, varnishes and glazes can be sprayed undiluted or slightly diluted.
1.
Stir the material up and put the required amount into the paint container.
2.
If the convey capacity is too low, add 5 - 10% dilution step-by-step until the convey
capacity fulfils your requirements.
6. Start-up
Before connecting to the mains supply, be sure that the supply voltage is identical with
the value given on the rating plate.
•
Unscrew the container from the spray gun.
•
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed
without
almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards.
(Fig. 2 B)
•
Set the container on a sheet of paper, pour in the prepared coating material and screw
the container tightly onto the spray gun.
7. Adjusting the desired Spray Setting
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
Turn the air cap (fig. 3, 2) to the desired spray setting position (arrow).