1. Not Synchronised
2. Screen unlocked
3. Noisy line across the screen
a) Adjust receiver antenna direction for optimal performance.
(see Pictures 5, 6)
b) Adjust transmitter antenna direction for optimal performance.
(see Pictures 5, 6 )
c) Check if the supplied voltage matches the adapter specification.
d) Select a different microwave channel by sliding the channel button on both transmitter
and receiver.
(see Pictures 4 )
e) If using a microwave oven, turn it off.
f) Remove microwave oven or clear unnecessary obstructions from the path
between transmitter and receiver.
g) Move transmitter and receiver closer. If the problems remain, please contact
your vender for help.
Remote control extender does not work
1) To ensure good infrared remote control operation aim your remote control at the I/R
Sensor Window on the TR 2470 and press the buttons firmly. ( With some remote
controls it may be necessary to press and hold each button for about a second). The
working angle of the I/R Sensor Window is +/- 15 degrees.
(see Pictures 7,8,9)
2) Check the path between the transmitter & receiver and clear unnecessary
obstructions.
4) Make sure the IR extender mouse is pointing toward the sensor precisely.
5) Check if the batteries on remote control are full of energy. Replace with new
batteries if necessary .
6) The optimum indoor operating range is about within 15 M.
6
