FURTHER APPLICATIONS
FURTHER APPLICATIONS WITH VCR
Connect the Transmitter to a VCR, which is connected to a TV.
a. by composite Video (RCA)
1. Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF
position before making any connections.
2. Take a RCA to RCA cable and connect one end to the A/V in of TX-2470
and the other to A/V out of VCR.
Get another cable and connect one end to one of the A/V out ports of VCR and the other to A/V
in of TV.
If your TV does not have any A/V in port then you can use 75
Ω
RF coaxial cable
from TV's antenna IN (or VHF/UHF) to your VCR's modulator output.
3. Plug one end of power cord of the adaptor into the DC jack on the TX-2470 and the
other end into any standard 120V AC outlet. Use only the adaptor provided.
4. Locate and orient the Transmitter according to picture 5 and 6 of this manual.
b. By S-Video
Please note: S-Video connectors has a special orientation, when you want to use S-Video
connection, you need to be carefully handled the connector, make sure the orientation is correct.
Push it gently, otherwise, you will broke the connector and conector socket of device
1.Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF position
before making any connections.
2.take RCA to RCA Cable(included), connect Audio RL to the Audio RL input socket of Tx2470,
then take S-Video to S-Video Connect to the S-Video Input of Tx 2470 connect the other
Audio RL to the Audio RL output of VCR, S-Video to the output S-Video of VCR get another
RCA to RCA , S-Video to S-Video cable connect the other output of VCR and the input of
Televisions
If your TV does not have any A/V in port then you can use 75
Ω
RF coaxial cable
from TV's antenna IN (or VHF/UHF) to your VCR's modulator output.
3.Plug one end of power cord of the adaptor into the DC jack on the TX-2470 and the
other end into any standard 120V AC outlet. Use only the adaptor provided
4.Locate and orient the Transmitter according to picture 5 and 6 of this manual
FURTHER APPLICATIONS WITH DVD, DSS OR OTHER
SATELLITE RECEIVER, OR LASER DISC PLAYER
Connect the Transmitter to a DVD,LD, Satellite receiver, which is connected to a TV
a. by composite Video (RCA)
1. Make sure the ON / OFF switch on both the transmitter and receiver is in the OFF
position before making any connections.
2. Take a RCA to RCA cable(included) and connect one end to the A/V out port of DVD, DSS
or LD and the other end to the A/V in of TX-2470.
Get another cable and connect to one of the A/V out of DDS, DVD, LD … and the other to A/V
in of TV.
if your TV does not have any A/V in port then you can use 75
Ω
RF coaxial cable
from TV's antenna IN (or VHF/UHF) to your DVD, DSS or LD modulator output.
3. Plug one end of power cord of the adaptor into the DC jack on the TX-2470 and the
other end into any standard 120V AC outlet. Use only the adaptor provided.
4. Locate and orient the Transmitter according to picture 5 and 6 of this manual.
10
