7
OPERATING MANUAL
VERSION 09/2016
ORDER NUMBER DOC 2366672
2.4
SAFETY PARAMETERS
WAGNER accepts no liability for any damage arising from incorrect use.
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
The double diaphragm pump may only be operated under the following conditions:
The operating personnel must be trained on the basis of this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must
be observed.
The statutory requirements and accident prevention regulation standards in the
country of use must be observed.
2.5
PROCESSIBLE WORKING MATERIALS
Fluid materials like paints and varnishes.
Application
TOPFINISH DD10
Water-dilutable products
Solvent-based lacquers and paints
Two-component coating products
Emulsions
UV lacquers
Primers
Epoxy and polyurethane lacquers, phenolic lacquers
Liquid plastics
Wax-based underside protection
Shear-sensitive lacquers
Legend
recommended
limited suitability
less suitable
Abrasive working materials and pigments!
Greater wear of parts carrying the product.
Use the application-oriented model (fl ow rate/cycle, product, valves, etc.) as
indicated in Chapter 5.4.2.
Check if the fl uids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.4.1.
NOTICE
