19
EN
Power Steamer 915e
• •
Connect it to the mains and switch the steam cleaner on.
Connect it to the mains and switch the steam cleaner on.
The operating display (B, red) and the steam display (C, orange)
The operating display (B, red) and the steam display (C, orange)
light up.
light up.
• •
As soon as the steam display (orange) switches off, the steam cleaner
As soon as the steam display (orange) switches off, the steam cleaner
is ready to be used (depending on the volume of water, this can
is ready to be used (depending on the volume of water, this can
take up to 9 minutes).
take up to 9 minutes).
8 Working with the steam cleaner
8 Working with the steam cleaner
General
ATTENTION! Change accessories only when the steam
cleaner is switched off and all individual parts have
cooled down!
• •
Set the lock (E) to ON to unlock the trigger guard (D).
Set the lock (E) to ON to unlock the trigger guard (D).
• •
Press the trigger (D) to let out steam.
Press the trigger (D) to let out steam.
i
While you are working the steam display (orange) can light up again. In this
event release the trigger so that the steam pressure can build again (this should
not take longer than 40 seconds).
If the trigger is pressed while the steam
display (orange) is lit, hot water might exit from the steam cleaner
i
If the work is interrupted for a longer period, a small amount of water can
collect in the steam tube because the device has cooled down. After switching
it back on again, a small jet of water (might be hot) will come out of the end
of the hose when the trigger is pressed. Allow this water to escape when you
start your work (e.g. into a bucket).
Floors/upholstery
i
You should test a small insignificant spot of any carpets or textiles you want
to clean. A number of materials and fabrics are NOT suitable to be cleaned
by steam for example: leather, furniture or floors that have been treated with
wax, artificial textiles, velvet or other steam-sensitive materials. Do not use on
unsealed hardwood, laminate floors or unglazed ceramic surfaces.
•
Before cleaning, first remove the dust from the surfaces you want to clean.
•
Depending on the floor surface, use the floor brushes (8) with or without the floor cloth (4).
•
Use the upholstery cleaner (9b) to clean upholstery.
Glass and ceramic tiles
Thermal shock can shatter glass Before cleaning glass surfaces heat them
gently by directing the steam jet at the surface but at a distance of at least
15 cm Do not use on glass if the temperature is below 0˚ C
•
Use the Window/Tile Cleaner (9a) to clean grime from tiles and windows.
A
B
C
ON
D
E
