WAGNER Power Painter, Руководство пользователя

Страница: 3 / 40

en
3
iMPortant SaFetY inForMation
SaFetY hazarDS
HaZarD: EXPLOSiOn Or FirE
Flammable vapors, such as solvent and paint
vapors, in work area can ignite or explode.
PrEVEnTiOn:
•
Do not spray flammable or combustible materials near
an open flame, pilot lights or sources of ignition such
as hot objects, cigarettes, motors, electrical equipment
and electrical appliances. Avoid creating sparks from
connecting and disconnecting power cords.
•
For use with only water-based or mineral spirit-type
materials with a minimum flash point of 100ºF (38ºC) — Do
not spray or clean with liquids having a flash point of less
than 100ºF (38ºC). Flash point is the temperature at which
a fluid can produce enough vapor to ignite.
•
Verify that all containers and collection systems are
grounded to prevent static discharge.
•
Connect to a grounded outlet and use grounded extension
cords (electric models only). Do not use a 3 to 2 adapter.
•
Keep spray area well ventilated. Keep a good supply of
fresh air moving through the area to keep the air within the
spray area free from accumulation of flammable vapors.
•
Do not smoke in the spray area.
•
Do not operate light switches, engines, or similar spark
producing products in the spray area.
•
Keep area clean and free of paint or solvent containers,
rags, and other flammable materials.
•
Know the contents of the paint and solvents being sprayed.
Read all material Safety Data Sheets (SDS) and container
labels provided with the paints and solvents. Follow the
paint and solvent manufacture’s safety instructions.
•
Fire extinguisher equipment shall be present and working.
HaZarD: ELEcTric SHOck
This product can cause injury due to electric shock.
PrEVEnTiOn:
•
Power cord must be connected to a grounded circuit.
•
Never submerge electrical parts.
•
Never expose the equipment to rain. Store indoors.
•
Keep electrical cord plug and spray gun trigger free from
paint and other liquids. Never hold the cord at plug
connections to support the cord. Failure to observe may
result in an electrical shock.
HaZarD: gEnEraL
This product can cause severe injury or property
damage.
PrEVEnTiOn:
•
Always wear appropriate gloves, eye protection, clothing
and a respirator or mask when painting. Hazardous vapors
– Paints, solvents, insecticides, and other materials can be
harmful if inhaled or come in contact with body. Vapors
can cause severe nausea, fainting or poisoning.
•
Do not operate or spray near children. Keep children away
from equipment at all times.
•
Do not overreach or stand on an unstable support. Keep
effective footing and balance at all times.
•
Stay alert and watch what you are doing.
•
Do not operate the unit when fatigued or under the
influence of drugs or alcohol.
•
Never aim spray gun at any part of the body.
•
Follow all appropriate local, state, and national codes
governing ventilation, fire prevention, and operation.
•
The United States Government Safety Standards have
been adopted under the Occupational Safety and Health
Act (OSHA). These standards, particularly part 1910 of
the General Standards and part 1926 of the Construction
Standards should be consulted.
•
Use only manufacturer authorized parts. User assumes all
risks and liabilities when using parts that do not meet the
minimum specifications and safety devices of the turbine
manufacturer.
•
Power cord must be connected to a grounded circuit.
•
Do not spray outdoors on windy days.