WAGNER PER-X1, Перевод оригинального руководства по эксплуатации, Страница: 4 / 68

Operating manual Robot powder spray gun PER-X1
Table of Contents
4 Order number 2444998 | Edition 10/2022
6.6.1 PER-X1 Single Outside (SO) 25
6.6.2 PER-X1 Single Inside (SI) 26
6.6.3 PER-X1 Twin Outside (TO) 27
6.6.4 PER-X1 Twin Inside (TI) 28
6.7 Grounding 29
6.7.1 Grounding the powder coating system 30
6.8 Safety Checks 30
7 Operation 31
7.1 Training the Operating Personnel 31
7.2 Tasks 31
7.3 Switching on the Robot Powder Spray Gun 31
7.4 Optimizing the Powder Cloud for Coating 31
7.4.1 Recommended Settings for Total Air Volume 31
7.5 Switching Off the Automatic Powder Gun 31
7.5.1 Switching Off in Normal Operation 31
7.5.2 Switching Off the Automatic Gun in the Event of Faults or Emergencies 32
7.5.3 Pressure Relief / Work Interruption 32
7.6 Reproducible setting of the nozzle position 32
8 Cleaning and Maintenance 33
8.1 Cleaning 33
8.1.1 Cleaning Personnel 33
8.1.2 Cleaning Procedures 33
8.1.3 Performing a Paint Change 33
8.2 Maintenance 34
8.2.1 Maintenance Personnel 34
8.2.2 Maintenance Instructions 34
8.2.3 Safety Checks 34
8.2.4 Maintenance Procedures 34
8.3 Replacing the Robot Spray Gun 35
8.4 Changing the Flat Jet Nozzle 35
8.4.1 Removing the Flat Jet Nozzle 35
8.4.2 Fitting the Flat Jet Nozzle 36
8.5 Changing the Round Jet Nozzle 37
8.5.1 Removing the Round Jet Nozzle 37
8.5.2 Fitting the Round Jet Nozzle 38
8.6 Replacing the Protective Wedge 38
8.6.1 Removing the Protective Wedge 38
8.6.2 Installing the Protective Wedge 39
8.7 Changing Nozzle Types 40
8.8 Mounting the Double Adapter 42
8.8.1 Removing the Nozzle and Electrode Holder 42
8.8.2 Installation of the Double Adapter 43
8.8.3 Cleaning the Double Adapter 44
8.8.4 Replacing the Wearing Parts 44
8.9 Assembly of the CoronaStar 45
9 Troubleshooting and Rectification 46
10 Inspections in Accordance with DIN EN 50177: 2009 47
10.1 Abbreviations 47
10.2 Overview Table 48
11 Disassembly and Disposal 50
11.1 Disassembly 50