manualshive.com logo in svg

WAGNER PER-X1, Перевод оригинального руководства по эксплуатации, Страница: 35 / 68

Поделиться
Скачать
WAGNER PER-X1 Скачать руководство пользователя страница 35

Operating manual Robot powder spray gun PER-X1
8   Cleaning and Maintenance

Order number 2444998 | Edition 10/2022

35

Maintenance work

Time stamp

Per shift

Weekly

Blow out gun and check for sintering

x

Check gun settings

x

Blow out powder hoses

x

Check grounding

x

Check compressed air quality

x

Check gun voltage

x

Check powder hoses for bends and sintering

x

8.3   REPLACING THE ROBOT SPRAY GUN

Before replacing the robot powder spray gun, any powder residue must be thoroughly
removed.
The wearing parts in the robot powder spray gun, marked in the spare parts list with 

"

♦

"

,

must be regularly checked and replaced as necessary.
To replace the robot spray gun, proceed in accordance with chapter Assembly of the
Variants [

8

 25].

8.4   CHANGING THE FLAT JET NOZZLE

8.4.1   Removing the Flat Jet Nozzle

P_04982

1.

2.

3.

1. Unscrew the union nut from gun housing.

2. Remove the union nut with the nozzle system from the gun body.

The nozzle system remains inserted in the union nut.

Note:

If the nozzle system doesn't remain inserted in the union nut, the nozzle system and
union nut must be replaced.

3. The parts can be separated by applying slight pressure to the flat jet nozzle.

Содержание PER-X1





































































Отзывы:

Нет отзывов