manualshive.com logo in svg

WAGNER PEM-C4-Ergo, Оригинальное руководство по эксплуатации

Поделиться
Скачать
WAGNER PEM-C4-Ergo Скачать руководство пользователя страница 22

22

PEM-C4-Ergo

.

OPERATING MANUAL

VERSION 02/2009

ORDER NUMBER DOC2305054

6.2.2 

FLUSHING PROCEDURE IN CONJUNCTION WITH EPG 2008/EPG PRIMA CONTROL UNIT

If the spray gun is operated with an EPG 2008/EPG Prima control unit and a PI-P1 powder 
injector, proceed as follows:

1.  Release the trigger on the spray gun so that the powder feed and high-voltage

generator are switched off.

2.  Set the knob for the overall air quantity on the EPG 2008/EPG Prima control unit to 

maximum. No more powder will be delivered when switching on again.

3.  Press the trigger on the spray gun so that the spray gun is blown free of powder.
4.  Switch off the control unit and secure against inadvertent switch on.

6.3 

PERFORMING A COLOR CHANGE

During a color change all parts carrying powder must be thoroughly cleaned of powder 
residue. In the following only the procedure for the powder spray gun is described.

Hint:

During a color change, the nozzle system does not necessarily have to disassemble.

CAUTION

Colors being displaced!

➞ 

If the outer nut is not screwed on tightly up to the stop position, the colors may 
smear.

6.3.1 

FLUSHING PROCEDURE IN CONJUNCTION WITH EPG SPRINT/EPG-D1 CONTROL UNIT

The fl ushing procedure can be set on the control unit if the spray gun is connected to 
an EPG Sprint/EPG-D1 control unit in conjunction with the PI-F1 powder injector. In this 
case the spray gun is blown free of powder as soon as the trigger is released. The precise
procedure is describe in the operating manual of the control unit.

Содержание PEM-C4-Ergo

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды