WAGNER GA 2800EA, Руководство по эксплуатации

Страница: 18 / 52

18
GA 2800EA, GA 2805EA
"?
"?
OPERATING MANUAL
EDITION 12/2008 PART NO. DOC350731
4.5
AIR ATOMIZING SPRAY PROCESS
4.5.1
ROUND AND FLAT JET
In this process, the material (paint) is fed to the nozzle with low pressure 0.05-0.2 MPa; 0.5-
2 bar; 7-29 psi. The atomizing air at approx. 0.25-0.4 MPa; 2.5-4 bar; 36-58 psi produces a soft
jet, which largely eliminates the problem of overlapping boundaries.
4.5.2
ROUND JET
The jet is cone-shaped.
4.5.3
FLAT JET
The spraying angle can be changed by adjusting the „fan air“. Depend on the material and
the output, a large range of nozzles and air caps are available to suit your needs (see para-
graph 9.1).
1 = Atomizing air
2 = Material
3 = Nozzle nut
Spray pattern
1 = Atomizing air 4 = Fan air
Spraying angle
2 = Material 3 = Air cap
Spray pattern