background image

23

GA 2000EAC, GA 2005EAC 

OPERATING MANUAL

EDITION 12/ 2008

PART NO. 350741

5.1.5 

EARTHING

Perfect earthing of all system components (work pieces, conveyor, paint supply system, 
control unit, spray booth or spraying stand, see illustration) is a prerequisite for optimum 
coating effi ciency and safety.

A badly earthed work-piece will result in:

 

Very poor wrap-around

 

Uneven coating thickness

 

Spray-back onto the spray gun, i.e. contamination

The prerequisites for perfect earthing and coating are

:

 

Clean work piece suspension

  Earthing of spray booth, conveyor system and hangers to the building earth in 

accordance with the operating instruction or the manufacturer‘s information

 

Earthing of all conductive parts within the working area

 

The earthing resistance of the work-piece must not exceed 1 M

Ω

 (Mega Ohm).

 

Connect the control unit to the mains system earth.

7!2.).'

$ISCHARGE OF ELECTROSTATICALLY CHARGED COMPONENTS IN ATMO
SPHERESCONTAININGSOLVENTS
%XPLOSIONHAZARDFROMELECTROSTATICSPARKSORmAMES

œ

%ARTHALLUNITCOMPONENTS

œ

%ARTHTHEWORKPIECESBEINGPAINTED

3)()??'"

WARNING

Heavy paint mist if earthing is insufficient!

Risk of poisoning
Insufficient paint application quality

œ

Earth all unit components.

œ

Earth the workpieces being painted.

SIHI_0003_GB

Содержание GA 2000EAC

























































Отзывы: