WAGNER Furno F500, Руководство пользователя

Страница: 6 / 128

FURNO 500
6
EN
Attaching and Detaching the Cordset
The cordset (Fig. 2, 1) for the Heat Gun is delivered detached from the
gun (Fig. 2, 2). To attach, line up the cord with the socket on the handle
of the gun and press firmly together until you hear a click. The cord
set does not need to be removed. If required to detach, insert a small
flat head screwdriver (Fig. 2, 3) or, similar tool into the hole as shown.
Firmly push the screwdriver and tilt it upward (4) towards the handle
to release the cordset. Firmly pull the cordset away from the gun.
Fig. 2
Attaching Detaching
1
2
3
4
Touch Pad Control Panel
The heat gun gives you a wide temperature range to choose from,
depending upon the type of project. Temperature can be adjusted via
the Control Panel.
Temperature Guide LED display
Description Fig. 3
1) Power button: Turns the heat
gun ON and OFF or switches
to cool down mode
2) Mode selector: Sets the
temperature range and air
flow speed you are using
3) Mode indicator: Low air flow
/ low temperature range (See
Fig. 4, a)
4) Mode indicator: High air flow
/ high temperature range
(See Fig. 4, b)
5) Mode indicator: Cool down 6) Temperature indicator:
Shows the current heat
output setting (see Fig. 4)
7) Temperature selector:
Decreases temperature (-)
8) Temperature selector:
Increases temperature (+)
Fig. 3
2 1
4
3
6
5
8
7