© 2003 Wagner Spray Tech. All rights reserved.
7
English
T
ROUBLESHOOTING
P
ROBLEM
A. Little or no material flow
B. Material leaking
C. Atomization is too coarse
D. Spray jet pulsates
E. Pattern runs or sags
F. Too much overspray
G. Pattern is very light and
splotchy.
C
AUSE
1. Nozzle clogged.
2. Suction tube clogged.
3. Material volume setting turned too far to the
right (-).
4. Suction tube loose.
5. No pressure build up in container.
1. Nozzle loose.
2. Nozzle worn.
3. Nozzle seal worn.
4. Material build-up on air cap and nozzle
1. Viscosity of material too high.
2. Material volume too large.
3. Material volume setting too far to the left (+).
4. Nozzle clogged.
5. Air filter clogged.
6. Too little pressure build-up in container.
1. Material in container running out.
2. Air filter clogged.
1. Applying too much material.
1. Gun too far from spray object.
2. Too much material applied.
1. Moving the spray gun too fast.
S
OLUTION
1. Clean.
2. Clean.
3. Turn to the left (+).
4. Insert.
5. Tighten container.
1. Tighten.
2. Replace.
3. Replace.
4. Clean.
1. Thin.
2. Turn to the right (-).
3. Turn to the right (-).
4. Clean.
5. Change.
6. Tighten container.
1. Refill.
2. Change.
1. Adjust material flow or increase movement of spray
gun.
1. Reduce distance.
2. Turn material volume setting to the right (-).
1. Adjust material flow or decrease movement of spray
gun.
Have you tried the recommendations above and are still having problems? In the United States, to speak to a customer
service representative, call our Customer Service at 1-800-328-8251 Monday through Friday between 8:00 AM and 4:30
PM Central time. An automated Self-Help option is also available at 1-800-760-3844, seven days a week, twenty-four
hours a day.
P
RODUCT
R
EGISTRATION
C
ARD
Send in your product registration card or register online at www.wagnerspraytech.com. Proper registration will serve as proof of
purchase in the event your original receipt becomes misplaced or lost. Returning this card will expedite the processing of your warranty.
Be sure you write your unit’s
date code
on the card before sending it.
The date code is located underneath the base of your unit
(for example, S087R).
The additional information will also help us to develop new products that best meet your needs and desires.
LIMITED WARRANTY
HVLP PAINT SPRAY EQUIPMENT
This product, manufactured by Wagner Spray Tech Corporation (Wagner), is warranted against defects in material and work-manship for one year
following date of purchase if operated in accordance with Wagner’s printed recommendations and instructions. This warranty does not cover damage
resulting from improper use, accidents, user’s negligence or normal wear. This warranty does not cover any defects or damages caused by service or
repair performed by anyone other than a Wagner Authorized Service Center.
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO ONE YEAR FOLLOWING DATE OF
PURCHASE. WAGNER SHALL NOT IN ANY EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER
FOR BREACH OF THIS WARRANTY OR ANY OTHER REASON. THIS WARRANTY DOES NOT APPLY TO ACCESSORIES.
THIS PRODUCT IS DESIGNED FOR HOME USAGE ONLY. IF USED FOR COMMERCIAL OR RENTAL PURPOSES, THIS WARRANTY APPLIES ONLY
FOR 30 DAYS FROM DATE OF PURCHASE.
If any product is defective in material and/or workmanship during the applicable warranty period, return it with proof of purchase, transportation prepaid to
any Wagner Authorized Service Center. (Service Center listing is enclosed with this product.) Wagner’s Authorized Service Center will either repair or
replace the product (at Wagner’s option) and return it to you, postage prepaid.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
