background image

26

FinishControl 3500

GB

TESTING OF THE UNIT

For safety reasons, we would recommend having the device 

checked by an expert as required but at least every 12 months 

to ensure that it can continue to operate safely.

In the case of unused devices, the check can be postponed 

until they are next started up.

All (potentially deviating) national inspection and mainte-

nance regulations must also be observed.

If you have any questions, please contact the customer service 

team at Wagner.

IMPORTANT INFORMATION ON PRODUCT LIABILITY

An EU directive valid since 01.01.1990 specifies that the manu-

facturer is only liable for his products if all the parts originate 

from the manufactured or are approved by him, and if the 

units are mounted and operated properly.

If accessories or spare parts from third parties are used, liability 

can be partially or completely inapplicable. In extreme cases 

the responsible authorities can prohibit the use of the entire 

unit (German industrial employer‘s liability insurance associa-

tion and factory inspectorate). 

With original WAGNER accessories and spare parts, compli-

ance with all safety regulations is guaranteed.

NOTE ON DISPOSAL 

In observance of the European Directive 2002/96/EC on waste 

electrical and electronic equipment and implementation in 

accordance with national law, this product is not to be dis-

posed of together with household waste material but must be 

recycled in an environmentally friendly way!

Wagner or one of our dealers will take back your used Wagner 

waste electrical or electronic equipment and will dispose of 

it for you in an environmentally friendly way. Please ask your 

local Wagner service centre or dealer for details or contact us 

direct.

GUARANTEE DECLARATION

(Status 01.02.2009)

1. Scope of guarantee 

All Wagner professional colour application devices (here-

after referred to as products) are carefully inspected, 

tested and are subject to strict checks under Wagner 

quality assurance. Wagner exclusively issues extended 

guarantees to commercial or professional users (hereafter 

referred to as “customer”) who have purchased the prod-

uct in an authorised specialist shop, and which relate to 

the products listed for that customer on the Internet under  

www.wagner-group.com/profi-guarantee. 

The buyer’s claim for liability for defects from the purchase 

agreement with the seller as well as statutory rights are not 

impaired by this guarantee. 

We provide a guarantee in that we decide whether to replace 

or repair the product or individual parts, or take the device 

back and reimburse the purchase price. The costs for materials 

and working hours are our responsibility. Replaced products 

or parts become our property. 

2. Guarantee period and registration 

The guarantee period amounts to 36 months. For industrial 

use or equal wear, such as shift operations in particular, or in 

the event of rentals it amounts to 12 months. 

Systems driven by petrol or air are also guaranteed for a 12 

month period. 

The guarantee period begins with the day of delivery by the 

authorised specialist shop. The date on the original purchase 

document is authoritative. 

For all products bought in authorised specialist shops from 

01.02.2009 the guarantee period is extended to 24 months 

providing the buyer of these devices registers in accordance 

with the following conditions within 4 weeks of the day of de-

livery by the authorised specialist shop. 

Registration can be completed on the Internet under 

 

www.wagner-group.com/profi-guarantee.   

The guarantee certificate is valid as confirmation, as is the 

original purchase document that carries the date of the pur-

chase. Registration is only possible if the buyer is in agreement 

with having the data being stored that is entered during reg-

istration. 

When services are carried out under guarantee the guarantee 

period for the product is neither extended nor renewed. 

Once the guarantee period has expired, claims made against 

the guarantee or from the guarantee can no longer be en-

forced. 

TESTING OF THE UNIT / INFORMATION ON PRODUCT LIABILITY / GUARANTEE DECLARATION

Содержание FC3500




















Отзывы: