WAGNER Cobra 40-10 Скачать руководство пользователя

Страница: 18 / 84

VERSION 01/2018

ORDER NUMBER DOC 2340851

Cobra 40-10 / 40-25

DESCRIPTION

5.1

COMPONENTS

B_06833

Cobra 40-10

B_06834

Cobra 40-25

Designation

1 Control housing with

integrated silencer

2 Air pressure regulator
3 Ball valve
4 Air motor
5 Compressed air Inlet
6 Mounting flange
7 Relief valve
8 Product outlet
9 Fluid section

10 Product inlet
11 Grounding connection
12 Pressure stage casing
13 Return socket
14 Valve depressor
15 Exhaust air cap

5.2

MODE OF OPERATION

The double diaphragm pump is driven with compressed air. This compressed air moves the

air piston in the air motor (4), and consequently the piston rod in the pressure stage (9), up

and down. At the end of each stroke the compressed air is redirected by a reversing valve

and the control piston. The up-and-down movement of both diaphragms within the fluid

section is produced by hydraulic oil, which is moved by the piston in the pressure stage.

With every stroke of the piston rod, working material is sucked in and delivered to the

spray gun at the same time.

5.2.1 AIR MOTOR

The air motor with its pneumatic reverse (1) does not require pneumatic oil. The compressed

air is fed to the motor via the air pressure regulator (2) and the ball valve (3).

5.2.2 FLUID SECTION

The fluid section has been designed as a double diaphragm pump with exchangeable

inlet and outlet valves. Change between "spraying mode" and "circulation mode" using

the relief valve (7).

Содержание Cobra 40-10





















































































Результаты поиска

Содержание Cobra 40-10

Отзывы:

Похожие инструкции для Cobra 40-10

Бренды по названию

Популярные бренды

WAGNER Cobra 40-10, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Cobra 40-10

Отзывы:

Похожие инструкции для Cobra 40-10

Бренды по названию

Популярные бренды