WAGNER Cobra 40-10 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 100

background image

Operating manual High-pressure double diaphragm pumps Cobra 40-10; Cobra 40-25
8 Cleaning and Maintenance

Order number 2340851 | Edition 05/2022

41

8 CLEANING AND MAINTENANCE

8.1 CLEANING

8.1.1 Cleaning Personnel

Cleaning work should be undertaken regularly and carefully by qualified and trained
personnel. They should be informed of specific hazards during their training.
The following hazards may arise during cleaning work:

– risk to health from inhaling solvent vapors,
– use of unsuitable cleaning tools and aids.

8.1.2 Decommissioning and Cleaning

The device must be cleaned to change products and for maintenance purposes. Ensure that
no remaining product dries on and sticks to the device.

WARNING

Brittle pressure regulator with filter!

The tank on the pressure regulator with filter becomes brittle through contact with
solvents and can burst. Flying parts can cause injury.

4

Do not clean the tank on the pressure regulator with filter using solvent.

1. Interrupt the work sequence in accordance with Chapter Pressure Relief / Work

2. Carry out basic flushing in accordance with Chapter Basic Flushing [

3. Empty system in a controlled manner according to Chapter Emptying Pump [

4. Service spray gun in accordance to its operating manual.

5. Clean and check the suction system and the suction filter.

6. Remove product filter (option): check and clean or replace filter insert and filter housing

in accordance with chapter Cleaning and Replacing the Filter [

7. Clean the outside of the system.

8. Fully assemble the system.

9. Fill the system with flushing agent in accordance with Chapter Filling the Empty Pump

8.1.3 Storing for Longer Periods of Time

If storing the system for a prolonged period of time, thorough cleaning and corrosion
protection are necessary. Replace the water or respective solvent in the product pump with
a suitable preserving agent.

1. Carry out decommissioning and cleaning (first until second to last step) in accordance

with Chapter Decommissioning and Cleaning [

2. Fill the system with preservation agent in accordance with Chapter Filling the Empty

3. Empty the system in a controlled manner in accordance with Chapter Emptying Pump

44] and seal the openings.

«
...
39
40
41
42
43
...
»

Содержание Cobra 40-10





































































































Отзывы:

Нет отзывов

Похожие инструкции для Cobra 40-10

Бренд: Jandy Страницы: 96

Бренд: X-POWER Страницы: 44

Бренд: Samson Страницы: 8

Бренд: vacuubrand Страницы: 44

Бренд: Enerpac Страницы: 10

UFLEX SilverSteer UP25 F-SVS

Бренд: Ultraflex Страницы: 29

Бренд: EBARA Страницы: 172

WEATHERMAKER 50TFQ008

Бренд: Carrier Страницы: 28

WS G140DC6 Series

Бренд: Waterstage Страницы: 64

Бренд: IBC Страницы: 8

Бренд: Anest Iwata Страницы: 4

Бренд: Giant Страницы: 8

Бренд: Nilfisk-Advance Страницы: 84

SUF-130- 300/400/500

Бренд: State Water Heaters Страницы: 76

Бренд: Nibe Страницы: 16

Бренд: Enapter Страницы: 30

Altherma 3 H HT Series

Бренд: Daikin Страницы: 20

FLEXPACK 25006801

Бренд: Heatcraft Refrigeration Products Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды