8
firmware version 2.2.0 clears from the
screen, press the M button. The meter
display will show the current material
setting. The factory preset number is :50.
Press the M button a second time. The
colon (:) will blink, indicating that you
are in the change mode.
Next, hold the M button down to increment
the material setting by :10. The value will
go as high as 1:00, then will wrap around
to :20 and continue incrementing. When
the desired setting has been reached,
release the M button and then press the
On/Hold button to store the material
setting and return to Inspection mode.
For a list of suggested material settings,
see the Material Settings Table section in
this manual.
3. The BI 2200 meter has a feature to
allow you to fine tune your moisture
meters readings for many different
