©2016 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
4
The starting load of an appliance is a major factor of whether an inverter can power it. Starting
load is momentary. With many appliances, it is approximately twice the continuous load.
However, some appliance starting loads can be as high as eight times the continuous load. To
determine if an appliance or tool will operate with this inverter, run a test. This inverter is will
automatically shut down in the event of an overload, so there is no danger of damaging either
the inverter or the equipment.
All Modified Sine Wave (MSW) inverters may not properly operate some appliances with either
speed control features or dimmer controls. Some appliance GFCI power cords will not operate
properly while powered by MSW inverters. Trial operation is the only way to know for sure.
s
WARNING: THE INVERTER OUTPUT CAN BE LETHAL� IMPROPER USE OF THIS INVERTER MAY
RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE�
FRONT PANEL
The Front Panel view shows the inverter’s ON/OFF Switch, Indicators, direct wiring High Output
Terminals, four AC Outlets and optional Remote Switch Connector.
VOLTS
AMPS OVER TEMP
OVER LOAD
AC TERMINAL BLOCK
ON
BATTERY
REMOTE
OFF
per outlet MAX. 1500W
Live
Neutral
Ground
High Output
Terminals
Remote
ON/OFF
Switch
Connection
ON/OFF
Switch
Overload LED
Over
Temp LED
Amp Display
Volt Display
Three 120V
AC Outlets
