Power Dome 400W
2
USER’S MANUAL - Please read before using this equipment.
3
Thank you for purchasing the Power Dome 400W Compact Generator by Wagan Tech.
With minimal care and proper treatment it will provide years of reliable use.
IMPORTANT INFORMATION
BEFORE POWER DOME USE, READ AND UNDERSTAND ALL WARNINGS,
CAUTIONS AND NOTES INCLUDED IN THIS MANUAL. FOLLOW
INSTRUCTIONS PROVIDED BY YOUR VEHICLE MANUFACTURER AND
MANUFACTURER OF DEVICES INTENDED TO BE USED WITH THIS UNIT.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
MAKE SURE THE POWER DOME IS FULLY CHARGED BEFORE FIRST USE.
MAJOR FEATURES:
1. 600 Amp Jumpstarter with heavy duty cable and clamps.
2. 260 PSI High Flow Air Compressor for inflating tires and accessories
3. Easy-Read analog Pressure Gauge
4. 400 Watt Power Inverter – 1000 watts peak – Two Outlets 115 Volts AC
5. Two 12 Volt Accessory Outlets for powering DC appliance loads to 18 Amps.
6. 1 USB power port
7. Bright Area light – LED type for long battery life.
8. AC Recharging Adapter
9. DC Recharging Adapter (fused)
10. Easy-Read analog voltmeter for checking Battery Status.
11. Jumpstart cable polarity indicator for safety.
FRONT VIEW
Figure 1 shows the locations of the Compressor, DC Power Outlets, Battery Status/Charging
and Work Light
(fig. 1)
BATTERY STATUS
Battery Status provides the user with a current state of charge on the internal battery. It is the
user’s responsibility to periodically monitor the battery charge and to recharge the battery
after each use. Recharge every three months even if the Power Dome is not used.
• Press and Hold the
BATTERY STATUS
Button
• The Battery Status Meter (DC Voltmeter) will display the battery voltage.
• Battery status (voltage) is read with charging adapters disconnected.
12.6 VDC and above – Battery is ready for use
12.0 VDC and below – battery needs some charging
Below 10.5 VDC – battery is discharged - charge immediately
